TRaCK Arcade — System Guide

System guide · rev B · draft

TRaCKArcade

How to connect, power up, control, update, and look after your TRaCK Arcade. To learn a game, see that game's own guide.

Consoles 2, identical
Brain 1 referee
Power 12 V DC
Games Ocean Battle, Connect X
01

What's in front of you

TRaCK Arcade is three boxes and a couple of cables:

  • Two consoles. These are identical — each simply reads Player Console, with nothing marking one as Player 1 or Player 2. Each has a 12×12 grid of light-up buttons, a small screen, and a dial you can turn and press. This is where you sit and play.
  • The brain. The referee for every game. It runs the game, keeps score, and holds the single speaker. It has its own small screen and volume dial, a power switch, and a Reset button. It needs power and your consoles plugged in.
  • Two console cables and one power supply. Each console connects to the brain with a ribbon cable. The power supply plugs into the brain.

The consoles are deliberately simple — everything a game knows lives in the brain. You choose which game to play from the Games menu, and each game has its own guide.

02

Setting up

  1. Power off first. Make sure the brain's power switch is off before you plug anything in.
  2. Plug into the brain's ports. The brain has two ports, A and B. For a two-player game, plug one console into A and the other into B. For a one-player game (where the game supports it), plug a single console into A only. Push each cable on until the latch clicks — the plugs are keyed and only fit one way, so don't force them.
  3. Plug in the power supply to the brain, then to the wall.
  4. Switch the brain on. Both consoles wake up to the title screen — the grid runs a slow, colourful wandering pattern while you wait. You're ready to play.
The port decides the side, not the console

Because the consoles are identical, it's the brain's A and B ports that assign the two sides — so it doesn't matter which console you plug where. One-player games always use port A. Swap consoles freely; just power the brain off before you do.

Boot up with consoles plugged in

Always start up with your consoles already plugged in, and power the brain down before you set up or move one. If a cable comes loose mid-game, just plug it back in — the game picks up where it left off (see Troubleshooting). And check a home-made cable's orientation before first use — a reversed cable can kill a console.

03

Controls & starting a game

Each console has three things you touch. The screen and dial together are one physical plate, labeled Captain's Console on the unit — that's the small sub-panel you're actually looking at and turning when you play.

ControlWhat it's for
The grid144 light-up buttons. Used for playing the game. It's the only thing that lights up in colour.
Captain's Console — dialTurn it to move through menus and choose options; press it to select. During play, a press opens the game's menu. Some games also use it for actions like committing a move — see the game guide.
Captain's Console — screenTells you what's happening — whose turn it is, menus, messages.

Starting a game

At power-up both consoles show the title screen. The first player to press the dial on their Captain's Console becomes the host. The host picks the game from the Games menu, then that game's options (rules, board size — whatever the game offers). From there, the game's own guide takes over.

04

Settings & what's saved

Two settings you'll reach for:

  • Volume is set on the brain, not the consoles — the single speaker lives there. Use the brain's own screen and dial. It runs 0 to 5, and 0 shows as OFF. While you turn the dial it plays a tone at the level you're setting, so you can judge it. Muting also speeds games up, because animations drop to short fixed beats instead of following the sounds.
  • Brightness is per console, from its dial menu, since each has its own grid. While you adjust it, the grid shows a fixed pattern echoing the TRaCK logo, so you're previewing the actual brightness on real pixels rather than guessing from a blank grid. Set each console to taste.

What survives a power-off

Your settings are remembered between sessions, so you're not resetting them every time:

SettingRemembered by
VolumeThe brain
Game options (for example rules and last board size)The brain — each game's guide lists its own
BrightnessEach console, on its own

A game in progress is not saved. Cutting the power ends the current game — which is the honest behaviour for a thing on a table.

05

Restarts & resets

Three ways to restart, from gentlest to biggest. Your saved settings survive all of them.

What you doWhat happens
Quick double-press of the brain's Reset buttonResets the current game.
Hold the brain's Reset button for 3 secondsEnters Update Mode — see Firmware updates. It does not reset the game.
Switch the brain off, then onFull restart. Ends any game in progress.
Consoles first

Whenever you restart with the power switch, leave the console cables as they are. When setting up or moving consoles, switch the brain off first.

06

Firmware updates

TRaCK Arcade can update its own firmware over WiFi. Updates bring fixes and new games. The brain has no internet connection of its own — it borrows your phone's or computer's for the minute or two it takes to check for and download an update.

UPDATE MODEJOIN WIFITRaCKArcade-B88APASSWORDoceanbattleOPEN 192.168.4.1
1. Brain: update mode (after 3 s hold)
UPDATINGCONSOLE A45%DO NOT UNPLUG
2. Brain: updating (console A, B, then Brain)
SYSTEM UPDATEUPDATING45%DO NOT UNPLUG
3. Console being updated
SYSTEM UPDATEPLEASE WAITUPDATING THE OTHER CONSOLEDO NOT UNPLUG
4. Console waiting its turn
What the brain and consoles show during an update
  1. Enter Update Mode. Press and hold the Reset button on the brain for 3 seconds. Hold it — a quick double-press instead resets the current game, not the firmware.
  2. Join the brain's WiFi. The brain's screen shows its WiFi name and password. The name is TRaCKArcade- followed by four characters that are different on every brain, so you can tell yours apart. Join it from a phone, tablet, or computer. On a phone, keep your cellular data on — you're joining the brain's WiFi for the connection, but still need your own data to reach the internet.
  3. Open the update page. Go to 192.168.4.1 in a browser. It checks the latest version and shows you what's available.
  4. Start the update. Keep the page open and don't unplug anything while it runs.
  5. Let it finish. Each console updates in turn — one not connected is simply skipped — then the brain updates itself last and restarts automatically. The page tells you when it's safe to close. You don't need to power-cycle anything: the brain restarts straight back into play mode.

Changed your mind, or already up to date? Tap Exit update mode on the page. The brain restarts and goes back to the title screen.

Both the brain's own screen and each console's screen show their own progress as this happens, so you can follow along without looking at your phone.

Don't unplug during an update

Power stays on and cables stay connected from Update Mode until the brain finishes restarting. Interrupting partway through can leave a console or the brain without working firmware.

If a console won't start a two-player game

Both consoles and the brain must be on matching firmware to play a two-player game — a mismatch blocks the start until they're updated to match. Solo play isn't affected by this check.

TRaCK ARCADE
SYSTEM UPDATE
Brainv1.7 → v1.8
Console Av1.7 → v1.8
Console Bnot connected
UPDATE TO v1.8
Takes about a minute.
Keep this page open.
Update available
TRaCK ARCADE
UPDATING
Console Adone
Console Bskipped
Braininstalling
DO NOT UNPLUG
Keep this page open.
Updating
TRaCK ARCADE
ALL SET
v1.8
INSTALLED
Brainv1.8
Console Av1.8
Brain is restarting.
You can close this page.
Done
The update page at 192.168.4.1
07

Care & handling

  • Keep it dry. It's open electronics — no drinks over the grid.
  • Clean with a dry or barely-damp cloth. No sprays or solvents on the buttons or screen.
  • Give it air. The brain and power supply get mildly warm; don't run them boxed in or under a blanket.
  • Carry by the handles, never by the cable. Unplug by the connector, not by pulling the ribbon.
  • Store the cables loosely coiled. Sharp kinks in a ribbon cable break conductors over time.
Power supply

Use only the supplied 12 V power adapter. A wrong-voltage adapter can destroy the unit. If the supply or a cable is frayed or damaged, stop using it.

08

Troubleshooting

What you seeWhat to do
LINK LOSTA console's cable came out or lost contact. Plug it back in — see If a console gets unplugged during a game below. If the brain's dot for that console stays red, check the cable is fully seated at both ends.
A console stays darkCheck the brain is switched on and the power supply is plugged in. Then check that console's cable is fully seated and latched.
Captains Console White/BlankPossable boot error in your console. Power off your Brain, release cables and power again. Also try changing ports
Nothing respondsAfter ten idle minutes out of a game, the unit sleeps to save the screen. Press any button to wake it.
The Brain screen unreadableThis could be a power problem. ensure you are using the power source we provided and that it is well seated. Power down with switch, reseat power cable firmly, power back on
No soundVolume may be at OFF (0). Raise it on the brain's own screen and dial.
Update won't download or gets stuckThe brain has no internet of its own — make sure your phone or computer still has its own data or WiFi internet connection while joined to the brain's network. Re-enter Update Mode and try again.
A two-player game won't startThe brain and both consoles must be on the same firmware version. Run an update — see Firmware updates.
Both consoles show the title and won't startSomeone has to host. Press the dial on either console to begin.
Pressing one grid cell triggers othersIf you press the grid cells at an angle it can create connections to the cells around it. Press stright down on the grid cell buttons.
A single grid button won't light or respondPower-cycle the brain. If one specific cell keeps misbehaving across all games, it's likely a hardware fault on that button — note which one for repair.

If a console gets unplugged during a game

The game pauses for that player. Their screen shows LINK LOST, and the brain's dot for that console turns red.

Plug the cable back in. The console restarts, reconnects on its own, and goes right back to the same game — same board, same turn, same colours. Nothing is lost.

The other player can keep playing their turn while the cable is out. Any moves they make show up when the console reconnects.

If the dot stays red, check that the cable is fully seated at both ends.

When in doubt, the safe reset is: power the brain off, check both cables are seated, power back on. Because the brain holds all the state, a clean restart fixes most oddities without losing your saved settings.

09

Specifications

Players1 or 2, depending on the game
Consoles2, identical and interchangeable
Grid12 × 12 — 144 light-up silicone buttons, ~180 × 180 mm
Screen3.5″ colour display per console (480 × 320)
ControlOne turn-and-press dial per console
BrainReferee unit; holds the single shared speaker, with its own screen and volume dial
Console linkKeyed ribbon cable, console to brain
Power12 V DC, ~6 A supply, with master switch and fuse in the brain
GamesOcean Battle, Connect X — more to come. Each has its own guide
TRaCK Arcade · system guide rev B (draft) · companion to each game's guide