TRaCK Arcade · game guide · rev B · draft
ConnectX
Drop chips, stack them up, and be first to line up your colour. Simple to learn, and the host can change the board size, how many in a row it takes to win, and even turn gravity off.
Object of the game
Players take turns dropping a chip into a column. The chip falls to the lowest open spot. Your chips stack up, your opponent's chips stack up, and the board fills from the bottom.
Be the first to get a straight line of your chips — across, up and down, or diagonal — and you win. The default is four in a row. If the board fills up and nobody has a line, it's a draw.
Quick start
The short version. Powering up, connecting, volume and updates are covered in the TRaCK Arcade System Guide.
- Declare host. Power on. The first player to press the dial on their Captain's Console becomes the host for this session.
- Host picks the game. Choose Connect X from the Games menu. It needs two consoles, so it's greyed out if only one is plugged in.
- Host sets the board. Pick the number of columns, rows, how many chips in a row it takes to win, and whether gravity is on — or leave the defaults (7 × 6, four in a row, gravity on) and start. (Section 03.)
- Host drops first. Take turns tapping a column to drop a chip. The host plays yellow, the other player plays blue. (Sections 04–05.)
- First line wins. A winning line lights up on both consoles. (Section 06.)
Set up your board
The host sets four options, then starts the game. Both consoles use the same settings. The game remembers your last choices, so you start where you left off.
On the host's console, turn the dial to move down the list and press to change a line. For a number, turn to adjust and press to set it. Gravity flips each time you press. A small preview of your board is shown at the top, with the setting summary under it.
| Setting | Range | Default | What it does |
|---|---|---|---|
| Columns | 4 – 12 | 7 | How wide the board is. More columns, more places to drop. |
| Rows | 4 – 12 | 6 | How tall the board is. More rows, longer games. |
| Chips to connect | 3 – 6 | 4 | How many in a row it takes to win. 3 is quick and tactical, 6 is a long fight. (4 – 6 when Zero G is on.) |
| Gravity | ON / ZERO G | ON | ON is the classic drop. Zero G turns gravity off — see below. |
Chips to connect can't be more than the smaller of columns and rows. On a 4 × 5 board, for example, the most you can pick is 4. The game adjusts it for you.
Zero G
Set Gravity to ZERO G and chips no longer fall. A chip stays exactly where you press, so you can build a line anywhere on the board, in the open or in the middle of nowhere. It's a very different game: you can block anywhere, and so can they.
Zero G needs at least four in a row. Turn it on with Connect set to 3 and the game raises Connect to 4 for you. The setup screen reminds you: ZERO G NEEDS CONNECT 4+. The play screen shows ZERO G beside the Connect number so both players know which game they're in.
The board sits at the bottom of the 12 × 12 grid, so chips drop down a column the way you'd expect. Squares outside your board stay dark. Smaller boards are centred as best they can be — slightly left of centre when the leftover width is odd.
Reading the board
Both consoles show the same board. The screen on your console tells you whose turn it is, and shows a YOUR COLOR chip so you always know which colour is yours.
Colours are set by role, not by choice: the host is always yellow and the guest is always blue. The winning line is shown in section 06.
Taking your turn
On your turn, choose a column and drop a chip. Your chip falls and lands on top of the stack in that column.
Tap any grid button in the column you want. It doesn't matter which row you press. That column drops the chip.
- One tap, no second press. Unlike firing in Ocean Battle, there's no aim-then-confirm step, so pick your column before you tap.
- The drop plays out on both consoles. You and your opponent both see the chip fall to its spot.
- The next turn starts right away. Unlike a missile launch in Ocean Battle, the drop sound doesn't hold up the game.
- A full column won't take a chip. Pick another column.
- Zero G: there are no columns. Tap the exact empty tile where you want your chip. The screen says
PRESS ANY EMPTY TILE. The chip just appears with no drop, and a tile that's already taken does nothing.
Winning, draws & who goes first
Winning
Get your set number of chips (four by default) in a straight line — across, up and down, or on a diagonal — and you win. Filling the very last spot with a winning chip still counts as a win.
- On the grid: after the last chip finishes falling, the chips in the winning line blink between full and dim, just under twice a second. Every other chip and the empty board dim down, so the line stands out. The win sound plays.
- On the screen: the winner sees
YOU WINand the other player seesPLAYER 1 WINSorPLAYER 2 WINS. Below that is a row of chips in the winner's colour, one for each chip to connect, with4 IN A ROW(or whatever the Connect setting was).
Draws
If the board is full and nobody has a line, the game is a draw. No line blinks and the whole board dims. The screen shows DRAW with BOARD FULL - NO WINNER, and the draw sound plays.
Who goes first
The game-over screen tells you who is up next: YOU GO FIRST NEXT GAME or PLAYER 1 GOES FIRST NEXT GAME (or 2).
- First game: the host.
- After a win: the player who lost goes first.
- After a draw: whoever didn't go first last time.
After the game
The host picks what's next:
- New Game — same board settings, fresh board.
- Back to Title — start over from scratch, including who hosts.
Changing the board or the game
The game-over menu has no direct Games menu option. There are two ways to get there:
- Keep the same host: choose New Game to open the Connect X setup screen. Change the board there, or choose Back to reach the Games menu.
- Start fresh: choose Back to Title, then press the dial to reach the Games menu. Whoever presses first becomes the host, so the host can change.
Good to know
- Two players only. Connect X needs both consoles. With one console plugged in, it's greyed out in the Games menu.
- A console gets unplugged mid-game. The game pauses and picks up where it left off when the cable is back. Nothing is lost. See the System Guide.
- Sound. Drop, win and draw each have their own sound. Volume is set on the brain — see the System Guide.
